2018年，要問瓷磚鋪貼材料的發展和現狀，目前國內瓷磚背膠產品越來越多，瓷磚背膠品牌也越來越選擇！要問哪個瓷磚背膠牌子好，大家除了傳統的在各大網站搜索瓷磚背膠信息外，如果不是瓷磚鋪貼行業從業人員，對於瓷磚背膠的產品信息了解甚少，所以在這裏，堿克瓷磚背膠有必要提醒大家，目前瓷磚背膠產品品牌越來越多，主要是得益於瓷磚背膠的良好鋪貼性能以及業主反饋好評率。瓷磚背膠對於低吸水率瓷磚的鋪貼難題起到了很好的作用，很好解決了瓷磚掉磚，空鼓，脫落等問題。但是，大家在選購瓷磚背膠產品的時候，記得區分乳液型背膠和膏狀瓷磚背膠。至於這兩個型號的背膠有什麽區別，大家可以去搜索看看，如果想長期保持瓷磚不掉磚的效果，真好選擇膏狀瓷磚背膠產品。以堿克瓷磚背膠為例，膏狀瓷磚背膠是開桶即刮即貼的，不改變傳統施工方法，成本也較瓷磚膠低廉。

近期，堿克瓷磚背膠準備出口外貿事宜，對於很多國外的朋友和用戶來說，瓷磚背膠這個市場新產品如何介紹呢？下麵以堿克瓷磚背膠的產品介紹，使用方法，注意事項，多少錢一桶等問題的中英對照來介紹給大家：

堿克瓷磚背膠產品介紹：

瓷磚在粘貼的過程中，由於受施工條件、環境溫度、粘結材料，尤其是瓷磚致密度及吸水率的影響，經常出現脫落的現象。針對瓷磚粘貼容易出現脫落這一難題，湖北堿克新材料有限公司與武漢理工大學材料學院、武漢科技大學聯合科技攻關，成功開發了JEARK堿克瓷磚背膠係列產品。該產品經過武漢理工大學高分子實驗室及國家建材質量檢測中心的嚴格檢測，指標均高於國家標準。使用JEARK堿克瓷磚背膠處理後，可以直接使用普通水泥砂漿進行瓷磚鋪貼，能大幅度降低鋪貼成本。

本產品施工的過程中無需改變傳統施工方法與習慣。膠漿刮塗在鋪貼材料（如玻化磚、大理石等）背麵，無需等待，即刮即貼，使用方便。相對市場上其他同類產品能節省大量施工時間。

Product description

Tiles peeling / falling off substrates, occurs quite often when influenced by construction condition, environmental temperature, bonding material, especially high density and low water absorption of high-grade porcelain tiles, such as vitrified porcelain tiles, full-body tiles, polished glazed tiles, microcrystal tiles, antique tiles, and natural stones, such as marble, granite.

To solve this problem, we co-worked closely with School of Material, Wuhan University of Technology (WUT). More than one year’s hard work benefited us with a big breakthrough, the new patented product - JANK Tile / Stone Adhesive Paste - has successfully brought us a new way of tiles / stones fixing, solved the problem of peeling / falling of tiles / stones, meanwhile, greatly improved the construction efficiency and lowered the construction cost.

JANK Tile / Stone Adhesive Paste is a paste-formed interface product to enhance the bonding of tile / stone and mortar, with special acrylic emulsion, inorganic fillers, special agents and quatz sand as main material.

The bulk products have been tested repeatedly by Macromolecule Lab of WUT, Hubei Provincial Building Material Quality Supervision and Inspection Station, National Centre for Quality Supervision and Test of Building Engineering, to find out that all the technical properties are better than the relative national (GB) or industrial standard.

堿克瓷磚背膠粘結原理

堿克瓷磚背膠分子與水泥砂漿表麵分子的粘結有兩個過程：

第一階段是瓷磚背膠分子借助於布朗運動向水泥砂漿表麵擴散，使兩個界麵的極性基團或鏈節相互靠近，在此過程中，升溫、施加壓力和降低瓷磚背膠粘度都有利於布朗運動的加強；

第二階段是吸附力的產生，當瓷磚背膠與水泥砂漿分子之間的距離達到10-5Å時界麵分子之間便產生互相引力，使分子間的距離進一步縮短到處於至大穩定狀態，從而達到超強粘結力。

The bonding theory of JANK tile / stone adhesive paste

The molecules of JANK tile / stone adhesive paste, and the surface molecules of mortar and tiles / stones will go two steps to finish the final bonding.

Step 1:  With the help of Brownian Movement, the special tiny nano molecules of our paste spread / penetrate into the tiles / stones back and the mortar surface, during this procedure, temperature increasing, more physical pressure will enhance the Brownian Movement.

Step 2:  When the two kinds of molecules reach a distance of 10-5Å, a series of complex chemical reactions happen, a super strong and stable gravitational force is built up between the two groups of molecules.  And special thanks to our paste with a thermal expansion coefficient nearly close to concrete, it’s nearly impossible to separate the mortar and tiles / stones after curing - our paste makes them“grow into” an inseparable whole unit.

In one word, JANK tile / stone adhesive paste achieves perfect combination of chemical and physical bonding with tile / stone, in replacement of only physical bonding by conventional mortar, and various cement adhesive / glue / grout & adhesive emulsion in market.

Technical Data

Test report by Hubei Provincial Building Material Quality Supervision and Inspection Station, as per China industrial standard JC/T 547-2005

Test report by National Centre for Quality Supervision and Test of Building Engineering, as per China GB 18583-2008

產品優點

1. 使用JEARK堿克瓷磚背膠，直接用水泥砂漿鋪貼，不需要使用瓷磚膠。

2. 不改變施工習慣，背膠刮抹到瓷磚背麵，立即用水泥砂漿直接鋪貼，不用等背膠幹固，節省施工時間，保證工期。

3. 耐水性好，耐老化性好，簽訂質保合同，質保20年。

4. 解決各類瓷磚，石材鋪貼難題，可不掉磚。

5. 造價遠低於瓷磚膠等鋪貼材料。

6. 粘結力強，JEARK堿克瓷磚背膠熱膨脹係數與砼接近，故很難從被粘結的基材上脫開，背膠幹固前通過布朗運動向水泥砂漿滲透，產生強大的吸附力，背膠幹固後極大提高了瓷磚與水泥砂漿的粘結強度。

7. JEARK堿克環保無毒。

Product features

1. Super bonding, perfect solution for high-grade tiles / stones fixing on walls.

2. Scrape JANK Tile Adhesive Paste on the back of tiles, then immediately pave the tiles on wall with conventional cement mortar (within 20 minutes, no need to wait until the paste dry and solid).

3. JANK Tile Adhesive Paste + cement mortar, instead of various tile adhesive / tile grout / tile glue, much better bonding, waterproofing and age-resistance, but much less cost.

4. Accelerated ageing test:

So, we promise quality guarantee of 20 years, with a warranty card in each bucket.

5. Environmental friendly, non-toxic, non-formaldehyde.

瓷磚背膠使用說明

1. 打開桶蓋即可使用；

2. 將膠漿均勻薄批到預處理的基麵上（如瓷磚背麵和需要粘貼的界麵）；

3. 趁膠漿未幹立即抹水泥砂漿鋪貼；

4. 按傳統施工方法鋪貼；

5. 每平方理論用量約為0.55公斤；

6. 若需打砸破壞試驗體驗至佳效果，需水泥砂漿充分固化（通風狀況良好、溫度20攝氏度以上、鋪貼15日之後）方可進行。

Application Method

1. Open the bucket and vacuum seal bag, scrape a thin layer of the paste on tiles / stones back (just fill the shallow grooves of tiles), not less than 80% of the surface area; don’t scrape the paste too thick.

2. Scrape cement mortar on tiles / stones before the paste turns dry and solid, better with 10 minutes, and then fix tiles / stones on walls; for big heavy tiles / stones, scrape half cement mortar on tiles / stones back, half on walls.

3. Consumption: theoretically 0.55kg/m2.

4. To have good smash test result, wait until the cement mortar is completely dry and solid (with good ventilation, at temperature above 20℃, 15 days after date of fixing).

適用範圍：

用於瓷片、低吸水率的玻化磚、通體磚、全拋釉、微晶石、仿古磚等高檔瓷磚類的界麵處理；特殊基麵如煙道、防水層、木板、玻璃等的預處理；用於新老砼麵、建築加固等領域的界麵增強。

Application scope

1. Interface treatment of ceramic tiles, high-grade low-water-absorption porcelain tiles, such as vitrified porcelain tiles, full-body tiles, polished glazed tiles, microcrystal tiles, antique tiles, and natural stones, such as marble, granite.

2. Pre-treatment of special substrates, like chimney flue, waterproof layer, old tiled-wall, wood board, glass, etc.

3. Interface enhancement for new and old concrete surface, building reinforcement and other fields.

Cautions

1. Do not add water or any other material in JANK Tile / Stone Adhesive Paste.

2. If there’s wax, dirt or excessive tile remover on back of tiles, cleaning need to be done beforehand.

3. Temperature not below 0℃ for transportation and storage, not below 5℃ for construction.

Package & shipment

8 kgs in vacuum seal bag, then in plastic bucket.

Transportation & storage

This product is non-flammable and non-explosive material. It can be transported by general cargo. Avoid sunlight, rain, squeezing and collision during transportation.

It must be stored at cool and ventilated space. Keep away from fire. Temperature not below 0℃.

Shelf Life

Be stored up to 18 months in an elevated, cool dry place in original packaging.